Costacurta筛板能满足很多行业的不同应用。

得益于我们悠久的生产历史和经验，Costacurta提供最可靠的冲孔，钻孔和铣削工艺来保证筛板的质量。

原材料库存和灵活的交期将满足您对工期的特殊要求。

Punched plates

These can be manufactured with different kinds of perforations, of which the main ones are round, square, rectangular, oblong, tapered and bridged. Standard size is 2000×1000 mm, however the machines used enable perforation of plates up to 6000×2000 mm. Thickness of the plates varies from 0,3 mm to 20 mm for plates in carbon steel and up to 15 mm for stainless steel plates. It is possible to obtain plates with perforated areas in special geometric shapes, for example trapezoidal or circular crowns. After perforating, the plates are straightened and may undergo degreasing treatment to eliminate residues of the lubricant used during the punching process. Plates with different levels of surface finishing can also be supplied, attainable through butter-finishing, sandblasting and electrolytic polishing. They can be produced in different materials, such as for example, carbon steel, stainless steels, Nickel-Chromium alloys, pure metals.

Drilled plates                             

Can be produced with three different kinds of perforations: cylindrical, step drilled and conical. The diameter of the perforations can vary from 1 to 6 mm. The maximum dimensions of the drilled plates are 6000×2000 mm, with a maximum thickness of 15 mm. After drilling, the plates are butter-finished and washed to guarantee perfectly clean perforations. They may undergo further surface finishing treatments, such as for example, sandblasting and electrolytic polishing. Different finishes or special coatings may be carried out following specific request by the client. The drilled plates can be produced in different materials such as: carbon steel, stainless steels, Titanium, Nickel-Chromium alloys, Copper and its alloys.

It is possible to produce plates with different milling profiles, in compliance with the client’s specific requests, by using the appropriate tools. The maximum sizes and thicknesses of milled plates depend on the type of milling required. After milling, the plates are butter-finished and washed to guarantee perfectly clean milled areas. They may undergo further surface finishing treatments, mainly sandblasting or electrolytic polishing. Different finishes or special coatings may be carried out following specific request by the client. The milled plates can be produced in different materials such as: carbon steel, stainless steels, Aluminium Alloys, Copper and its alloys.